Date:         Wed, 9 Jun 2010 14:45:22 EDT
Reply-To:     VWBrain@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Dearing <VWBrain@AOL.COM>
Subject:      Re: More Clutch - Pilot Bearing Nightmare
Comments: To: scottdaniel@TURBOVANS.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 6/9/2010 2:31:39 P.M. Eastern Daylight Time,
scottdaniel@TURBOVANS.COM writes:

there is  a special pilot bearing removal tool of course.
it's a slide hammer deal  with expanding fingers that get in behind the
pilot
bearing., then it just  slides/pops  right out.



hey Scott it is called a blind bearing puller, snap-on sells a kit that has
 3 different size ones in it.  I made mine out of all thread years  ago .
even works on pulling vannie wrist pins out   later  mark d

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.