I can tell you this, it is very easy to do rear springs on a vanagon. and adding or taking out a spacer plate would in turn be quite easy. my guess is, it will take time before you need to ad the spacer ( if at all ) i would try with out. it's only one bolt to take out if you change your mind ;) good luck J On 16-Jun-10, at 8:16 PM, Alex Madison wrote: > Hi I just received my 2wd 1.5 lift springs made by gowesty from > vancafe. I ordered a spacer to put on my driver side to compensate for > the westy lean but reading on the samba sounds like others put in a > spacer on each side that came with the kit. Can anyone tell me if they > have spacers on both sides with there gowesty lift springs. > Cheers > Alex > 1989 westy > Bostig in the back |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.