Date: Thu, 17 Jun 2010 10:57:58 -0600
Reply-To: Tom Buese <tombuese@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tom Buese <tombuese@COMCAST.NET>
Subject: Re: No gears (resolved)
In-Reply-To: <BAY136-W269296EBD0D50D6ECCF3FED0DF0@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed; delsp=yes
On Jun 16, 2010, at 6:19 PM, pierre m d wrote:
> Thanks to everybody...
>
> Finaly Thomas was right, it was the slave cylinder.
That's the 1st thing I have gotten right since being on this list?
>
>
>
> Now, all set to go on vacation!
Have a great trip.
YMMV,
Mr. BZ-no mechanic, but BTDT
>
>
>
>
> Thanks again
>
>
>
> pierre
>
>
>
>
>
>
>
> Date: Mon, 14 Jun 2010 21:27:17 -0400
> Subject: Re: No gears
> From: greenvanagon@gmail.com
> To: pmdorais@hotmail.com
> CC: vanagon@gerry.vanagon.com
>
> My $1 says your pilot bearing is the problem.
>
> The clutch feels fine, right? Hydraulic problems make the pedal
> feel different.
>
> I think that your pilot bearing went and so now the transmission
> input shaft can't rotate independently of the engine flywheel. Even
> though the clutch can disengage just fine, it doesn't matter,
> because the input shaft is stuck in the flywheel. So the
> syncromeshes won't let you shift with the engine going, because the
> input shaft can't be stopped.
>
> Why do I think this? because the same thing happened to me a month
> ago.
>
>
>
>
>
>
> On Sun, Jun 13, 2010 at 6:28 PM, pierre m d <pmdorais@hotmail.com>
> wrote:
>
> HI Scott ,
>
> Sorry, i didn't make myself clear.
>
>
>
> In fact, as you said it's more like i can't get the shift lever to
> move into the gear when the
>
> engine is running.
>
>
>
> I was able to get back in first by stopping the car, put the shift
> in 1st and start back the engine and i manage to get home.
>
>
>
>
>
> Thanks for the advice.
>
>> From: scottdaniel@turbovans.com
>> To: pmdorais@HOTMAIL.COM; vanagon@GERRY.VANAGON.COM
>> Subject: Re: No gears
>> Date: Sun, 13 Jun 2010 14:24:24 -0700
>
>
>
>>
>> do you mean that everything feels normal, and with engine running
>> when you
>> push in the clutch pedal, put it in first, then let the clutch
>> out....the
>> van does not move ?
>>
>> that's what 'no gears' usually would mean.
>>
>> on old air-cooled VW's that was common when the splines in a rear
>> drum
>> stripped out ...
>> the axle would just spin in the drum on one side, giving 'no
>> gears' ...as
>> though say, the input shaft to the trans was broken. ( have never
>> seen the
>> splines strip out in a rear axle flange on a vanagon though ) .
>>
>> your other comment ..
>> "when the motor is not working, the gears seem to engage fine."
>>
>> That makes me wonder if you mean you can't get the shift lever to
>> move into
>> a gear when the engine is running ..
>> in that case you think about the clutch not releasing ...say pilot
>> bearing
>> is wasted and not allowing clean clutch disengagement, or a clutch
>> hydraulic
>> issue etc.
>>
>> Scott
>> turbovans
>>
>> ----- Original Message -----
>> From: "pierre m d" <pmdorais@HOTMAIL.COM>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Sunday, June 13, 2010 1:45 PM
>> Subject: No gears
>>
>>
>> HI,
>>
>>
>>
>> I have a vanagon 1983 watercooled that i just put out of winter
>> storage
>> yesterday. I went out for a 60 miles trip and everything was fine.
>>
>>
>>
>> Today, i tried to go out and all the gears were missing. The clutch
>> seems
>> fine, doesn't seems to have a pressure problem. The fluid level is
>> fine and
>> i haven't seen any leakage. The master cylinder was changed 2 years
>> ago.
>>
>>
>>
>> However, when the motor is not working, the gears seem to engage
>> fine.
>>
>>
>>
>> What could be the problem? Any ideas?
>>
>>
>>
>>
>>
>> Thanks!
>>
>>
>>
>>
>>
>> Pierre
>>
>> _________________________________________________________________
>> Regardez-moi dans les yeux : vidéobavardage GRATUIT
>> http://go.microsoft.com/?linkid=9734396=
>>
>
> _________________________________________________________________
> Regardez-moi dans les yeux : vidéobavardage GRATUIT
> http://go.microsoft.com/?linkid=9734396
>
> _________________________________________________________________
> Regardez-moi dans les yeux : vidéobavardage GRATUIT
> http://go.microsoft.com/?linkid=9734396