Date:         Fri, 18 Jun 2010 15:21:23 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: I'm fixing a hole [in the fresh water tank]
Comments: To: "Mike \"Rocket J Squirrel\"" <camping.elliott@GMAIL.COM>
In-Reply-To:  <4C1BBC4A.8060800@gmail.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Dear Mr. Scurrilegs,

At 02:34 PM 6/18/2010, Mike \"Rocket J Squirrel\" wrote:
>crap under there for me to want to find out. I presume it's a
>breather/overflow line for the tank and possibly dumps into the sink
>drain line? Just a guess. But anyway,

Should vent to the outside via a hole in the fill panel.


>Any tips or better ideas before I proceed?

Yes.  RTV isn't going to stick to that polyethylene tank.  Use
something that stays sticky, or break down and get another
grommet.  I got some sticky gray stuff from local RV dealer, I
*think* it's used to seal rooves.  But it worked a treat sealing the
bellows on my Porta-Potti where it plugged into the base.

Yrs,
d