At 01:08 PM 6/23/2010 Wednesday, John Meeks wrote: >I found that cleaning the big instrument pod connector and the blue flexy >circuit it connects to can make the difference. Won't affect the blinking-light issue though.
>You can run some test leads from the two posts on the back of the gauge and >check that the voltage is ~ 10v with the ignition key on. Absolute limits are 10.500 -- 9.500. 9.499 and it will blink forever. What you want to see is 10.0 +/- .25 volts.
>If you do need to fix the gauge, I have some pix and stuff that may help at >http://www.vanagonauts.com/Warning-Light-Fix241.htm Excellent stuff. I'm a proponent of taking the gauge apart myself, especially because I'm also a proponent of brighter warning LED*; but either way it's a fiddly little business. Shaky hands are not your friend here. John makes it look easy... ;-) *The existing LED is a 5-volt self-flashing device in series with a 5.1v zener diode. To change it you have to replace the zener with the appropriate resistor. Radio Shack sell a nice bright but very slow-flashing LED, four excellent bright diffused red non-flashing ones in each of their LED assortment packs, and some water-clear non-flashing focused ones that will put your eye out, which is my particular choice. I want to *know* when the thing goes off. But if you don't want to go the icepick route, the assortment has enough lovely bright diffused ones to do the gauge and the alternator and oil lights as well. The flashing oil light on 2.1l vans is handled by the DOPS circuit; it's a regular LED, plug-in replacement. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.