Date:         Fri, 25 Jun 2010 15:04:28 -0400
Reply-To:     "Jack R." <jack007@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Jack R." <jack007@COMCAST.NET>
Subject:      Re: lug nuts torque-
In-Reply-To:  <vanagon%2010062514283832@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="us-ascii"

And a good "6" point socket for sure!!

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Rob
Sent: Friday, June 25, 2010 2:22 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: lug nuts torque-

At  6/25/2010 07:57 AM, Alistair Bell wrote:
>get the breaker bar as a few of us advised before
>
>
>I really don't understand the reluctance to get a real wrench, ie
>1/2" breaker bar and socket for this job.
>
>oh well Dave, to each his own.
>
>alistair

I think you get a real appreciation for the breaker bar/socket AFTER
the 4 way or stock lug nut tool did not work. If the failure happens
in the rain-snow-dark it just helps you appreciate the bar & socket
approach.



Rob
becida@comcast.net
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.830 / Virus Database: 271.1.1/2961 - Release Date: 06/25/10
02:35:00