Date:         Mon, 28 Jun 2010 22:14:04 -0500
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Re: While replacing steering rack.....
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <05f101cb1738$b344d070$6401a8c0@PROSPERITY>
Content-Type: text/plain; charset=ISO-8859-1

Oh...now it's all clear. :-) just messing with ya.
Michael in San Antonio
91GL Weekender AT 2.1L 'Gringo'
73 Beetle


On Mon, Jun 28, 2010 at 10:10 PM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:

>  that means that the front wheels are tilted inward or outward by turning
> a large bolt that runs through the  inner bushings on the upper A-arm .
>   It's mounted eccentrically where the bushings are ..
> moving the a-arm inward or outward as you twist the long bolt that goes
> through those bushings.
>
> clear enough ?
>
>  ----- Original Message -----
> *From:* Michael Sullivan <sandwichhead@gmail.com>
> *To:* Scott Daniel - Turbovans <scottdaniel@turbovans.com>
> *Cc:* vanagon@gerry.vanagon.com
> *Sent:* Monday, June 28, 2010 7:56 PM
> *Subject:* Re: While replacing steering rack.....
>
>   <Did they know about camber adjustment via the eccentrically mounted
> upper
> A-arm inner long bolt ?>
>
> err...what does that mean?
>
> --from Always Sunny in PA--"Illiterate..what does that even mean?"
> Michael in San Antonio
> 91GL Weekender AT 2.1L 'Gringo'
> 73 Beetle
>
>
> On Mon, Jun 28, 2010 at 9:46 PM, Scott Daniel - Turbovans <
> scottdaniel@turbovans.com> wrote:
>
>> Did they know about camber adjustment via the eccentrically mounted upper
>> A-arm inner long bolt ?
>>
>
>