Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2010, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Jun 2010 20:25:19 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: While replacing steering rack.....
Comments: To: Michael Sullivan <sandwichhead@gmail.com>
Content-Type: text/plain; charset="iso-8859-1"


how dare you waste my valuable time !
lol.  :-) 
  ----- Original Message ----- 
  From: Michael Sullivan 
  To: Scott Daniel - Turbovans 
  Cc: vanagon@gerry.vanagon.com 
  Sent: Monday, June 28, 2010 8:14 PM
  Subject: Re: While replacing steering rack.....




  Oh...now it's all clear. :-) just messing with ya.
  Michael in San Antonio
  91GL Weekender AT 2.1L 'Gringo'
  73 Beetle






  On Mon, Jun 28, 2010 at 10:10 PM, Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote:


    that means that the front wheels are tilted inward or outward by turning a large bolt that runs through the  inner bushings on the upper A-arm .
      It's mounted eccentrically where the bushings are ..
    moving the a-arm inward or outward as you twist the long bolt that goes through those bushings. 


    clear enough ? 
      ----- Original Message ----- 
      From: Michael Sullivan 
      To: Scott Daniel - Turbovans 
      Cc: vanagon@gerry.vanagon.com 
      Sent: Monday, June 28, 2010 7:56 PM
      Subject: Re: While replacing steering rack.....




      <Did they know about camber adjustment via the eccentrically mounted upper
      A-arm inner long bolt ?>


      err...what does that mean?


      --from Always Sunny in PA--"Illiterate..what does that even mean?"
      Michael in San Antonio
      91GL Weekender AT 2.1L 'Gringo'
      73 Beetle






      On Mon, Jun 28, 2010 at 9:46 PM, Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote:


        Did they know about camber adjustment via the eccentrically mounted upper
        A-arm inner long bolt ?
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.