OK, if you read my last post you saw I found an exhaust system. My current one is in really bad shape, the rear pipe was cracked, welded, then cracked again at the weld and has cracked completely in two in another spot. Now, looking at the exhaust port at #3, the nuts are so badly rusted that I know they are going to snap off when I try to remove them, leaving whats left of the stud in the head. Any suggestions? Thanks, Jeff
Jeff Stewart |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.