At 02:40 PM 7/1/2010 Thursday, Mike \"Rocket J Squirrel\" wrote: >The cap is a three-part construction: two plastic cap parts, and an >elastomer ring captured between the two pieces. This latter provides a >seat for the lip of the tank drain outlet. The ring seems a bit mooshed. Vaseline the spout. Carefully lay some RTV gasket compound over the existing rubber, let it set mostly and then screw it on the spout, not too hard. I've done this with other similar things, not this particular one. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.