Date: Mon, 12 Jul 2010 12:41:23 -0700
Reply-To: Jay lefstein <jleftbrane@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jay lefstein <jleftbrane@GMAIL.COM>
Subject: Re: no power to tranny??
In-Reply-To: <000a01cb21dd$131a2280$394e6780$@com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
hey guys... so i was posting on behalf of a nice guy who I had done
some work on his van.... i went to see it this morning and I fixed it..
turns out that he had the rear wheel bearings done after i worked on
it ( they must not have tightend the shaft enough ) ... the cv shaft
came off on the wheel side. he had assumed it was a clutch / tranny
issue and somehow didn't notice it was off the wheel side when he
checked... also he thought when his dash light was off it was in
4x4... when in fact it's the other way around ;)
thanks
for all the help... it took a lot of weight off my shoulders
J
On 12-Jul-10, at 9:12 AM, Daryl Christensen wrote:
> If it's a cv, you could have pulled the decoupler engaged and kept on
> driving with fnt wheels only. May just be loose bolts..They should be
> retightened after things have been apart just to be sure they got
> torque
> tight enough.
>
> Daryl of AA Transaxle
> 425-788-4070
> "On the cutting edge of Old technology"
> 86 Syncro Westy with a Zetec in the trunk
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> Behalf Of
> Jay lefstein
> Sent: Monday, July 12, 2010 7:32 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: no power to tranny??
>
> yes tripple knobs means both lockers and a decoupler ;).. is there
> another term for it?
>
> have you seen a clutch plate come apart in the middle?
> On 11-Jul-10, at 11:35 PM, BenT Syncro wrote:
>
>> On Sun, Jul 11, 2010 at 11:12 PM, Jay lefstein
>> <jleftbrane@gmail.com> wrote:
>> hey guys... i was driving along in third gear at low revs ( 1987
>> syncro with a bostig and triple knobs ) when i here a noise almost
>> like something hit my door... and then no power from the engine to
>> the
>> tranny in any gear
>> engine seems fine
>> clutch feels normal
>> I think is sound like something is rattling now when engine is
>> running..
>>
>> what are your thoughts?
>>
>>
>>
>> Clutch plate coming apart in the middle? What do you mean by "triple
>> knobs"? Do you have a decoupler installed? Or did you put house-
>> style knobs of three of your doors?
>>
>>
>>
>> --
>> BenT
>
|