Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (July 2010, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 10 Jul 2010 08:28:30 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: naive A/C lines question
Comments: To: Keith Hughes <keithahughes@Q.COM>
In-Reply-To:  <BLU0-SMTP59126F8AB7552CA5BE4388DAB60@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; delsp=yes; format=flowed

Good points Keith,

Its a pity the lines and condensor are not up to the task of being oil cooler. While I am not 100 percent sold on the remote cooler set up (even though it is proven, see here http://www.syncro-bernd- jaeger.de/ENGLISH/Olkuhleranlage/olkuhleranlage.html), it would have been great if AC set up was suitable.

As to why I don't keep the AC? Out here in Victoria we really don't need it, and I want the extra space. It will be taken out within the month :)

cheers

alistair

On 9-Jul-10, at 9:55 PM, Keith Hughes wrote:

> Date: Fri, 9 Jul 2010 19:53:07 -0700 > From: Alistair Bell<albell@SHAW.CA> > Subject: naive A/C lines question > > My '86 has factory AC, which is not working, and I plan on removing > it. But I was wondering about the little AC rad at the front of van, > and the lines to and from it. Are those lines, and rad, suitable for > an oil cooler application? > > I have no idea what material the lines are made of, and what the > inside diameter is. Nor do I know anything about the little rad. > Well, the "little radiator" is a "condenser". The material of the OEM units I've seen is copper. It's your basic fin and tube heat exchanger. ID is probably like 1/4 - 5/16". The condenser itself, other than having a pretty high pressure drop across it, would do fine as an oil cooler. The hoses, not so much, most likely. They are pressure and temperature rated, but it's questionable as to whether they are stabile with hot motor oil; the material is designed for freon, which is not particularly aggressive, and mineral oil. If you're contemplating using the lines and the condenser as they are currently plumbed, I'd say you'd have major problems. Way too much pressure drop with that length of hose and exchanger. Also, if you do decide to try that route, make sure you remove the receiver/drier from the hose path. A cheaper and more useful solution would be a generic transmission cooler IMO.

Anyway, the low (here) was 90°F last night, and 110°F today. Why not fix the A/C instead? :-)

Keith Hughes '86 Westy Tiico (Marvin)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.