Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2010, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 10 Jul 2010 10:41:56 -0700
Reply-To:     Jay lefstein <jleftbrane@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay lefstein <jleftbrane@GMAIL.COM>
Subject:      Re: Cockeyed Parking Brake Equalizer
Comments: To: "Mike \"Rocket J Squirrel\"" <camping.elliott@gmail.com>
In-Reply-To:  <4C38AC4F.8040802@gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

ok, so yeah they show a funky tool ... I work at a shop that was a vw dealer from the 50's till 2003... we don't have or use that tool... may have had it long before i worked there.. i use a rather short flat screwdriver..

jack on side of the van up till the wheel will spin ( chock the front wheels first ) .. now adjust till it's tight and then 2 click s back ( the wheel should seem slow but free )

now do this on the other side...

this is simple when you have done it but takes patients and trial and error when doing it your first time... sorry my description is so poor. i hope it helps

ps, this does not guarantee your equaliser will be perfectly straight .. mine isn't .... are you sure you don't have a bigger brake problem? have you taken a drum off? maybe you have a had a sticking P/ brake cable?

brakes are easy once you have done them with someone who knows... i did them from the bently first time and it worked but now after seeing a guy do them, who has been doing them since vanagons existed i can do it better ;)

good luck J On 10-Jul-10, at 10:22 AM, Mike Rocket J Squirrel wrote:

> I'm looking at Bentley's and what I see is the top photo on 46.9 > which looks like there has been some disassembly done, using more > than a screwdriver, it seems. Am I not seeing the e-z way to adjust > the brakes? > > And, is adjusting the brakes how one gets that equalizer piece > uncockeyed? > > -- > Rocky J Squirrel > 84 Westfalia: Mellow Yellow ("The Electrical Banana") > 74 Westrailia: (Ladybug Trailer company, San Juan Capistrano, Calif.) > Bend, OR > KG6RCR > > > > Jay lefstein wrote: >> you don't have a small / med flat screw driver? thats all it >> takes ;) >> On 10-Jul-10, at 9:59 AM, Mike Rocket J Squirrel wrote: >>> Given that my parking brake doesn't do a whole lot, I climbed >>> under the >>> van to take some slack out of the linkage. I stopped when I saw >>> that the >>> equalizer (Bentleys 46.11) is at quite an angle, not at a right >>> angle to >>> the centerline of the van as I expected. I'm not sure what this >>> means. I >>> don't have the tools to adjust the brakes. >>> >>> -- >>> Rocky J Squirrel >>> 84 Westfalia: Mellow Yellow ("The Electrical Banana") >>> 74 Westrailia: (Ladybug Trailer company, San Juan Capistrano, >>> Calif.) >>> Bend, OR >>> KG6RCR


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.