Date:         Fri, 9 Jul 2010 10:43:53 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Tool Question. (re: gas tank and general wrenching)
Content-Type: text/plain; charset=ISO-8859-1

Hi all.

Not long after resealing my new gas tank, I noticed a little fuel
seepage at 2 hose connections if tank over filled. 1 being at the
driver side end of crossover tube to exp. tank. The goal is to replace
the stupid cable straps with clamps.

Had read that it's possible to do some work on gas tank while it's
still mounted in place.

Would these long nose pliers be of use for a job like this?   pic of
tool types:   http://cdn.overstock.com/images/products/P949265a.jpg

And useful for other Vanagon wrenching stuff too?

Thanks,

Neil.

--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.