I have an elusive coolant leak in my 1.6TD which only appears under very hot conditions which I cannot reproduce on this little island... (none of the hills are long enough!) Last time we drove the Coqihalla, I lost a few inches in the fill tank, and it was dripping from the head heater hose outlet area. I suspect the hose either has a pinhole, or the head flange is leaking, but need to pressure test. Can I hook up my compressor and feed 15psi into the pressure tank using the overflow cap, or will this mess with the valve in there? (I'm using a 2.1L WBX tank and cap). Thanks -- Shawn Wright |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.