It's really best to use a flycutter. Search that online. I picked them up on eBay for about 10 cents on the dollar compared to buying them from traditional stores. BenT
On Jul 15, 2010, at 10:04 PM, Shawn Wright <vwdiesels@GMAIL.COM> wrote: > Ok, machining 1.5mm material from EV wheels is not as easy as it > looks... > > Friend has a milling machine I can use (big 2hp drill press with > sliding > bed), but is away for a few days. Any suggestions on what type of > bit to > use? I looked at what he has and couldn't find anything suitable. If > I could > machine a 2.5" (63mm) hole dead centre (or close) I'd be set. Can I > get a > hole saw for cutting steel? > > A grinding wheel on a drill isn't going to do it... > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.