Date:         Sat, 17 Jul 2010 09:21:08 -0700
Reply-To:     Craig Luke <cluke.aspire@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Craig Luke <cluke.aspire@GMAIL.COM>
Subject:      Re: subject Re: Where to buy Limbo Hatch Stick?
Comments: To: Mike Miller <mwmiller@cwnet.com>
In-Reply-To:  <C8670E4F.CB38%mwmiller@cwnet.com>
Content-Type: text/plain; charset=ISO-8859-1

The one that I just picked up was a big 5/8's one, open on one end.  I was
stunned by how well it works with no mods at all.  I'm going to add some
permanent loc tite on the threads to add some security...

On 2010-07-17 7:40 AM, "Mike Miller" <mwmiller@cwnet.com> wrote:

In my experience [limited to one hardware store] the angle on the J isn't
right so it has to be bent [not BenT] anyway. Never could get it right.
Getting the hatch latch extension.

JME

Mike


On 7/17/10 3:34 AM, "Frank Condelli" <RAlanen@AOL.COM> wrote:

> In a message dated 17/07/2010 12:08:56 A.M. Eastern Daylight Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
>         Well, you don't even need  to do any work, there are turnbuckles
> available that have one closed loop  hook and one open J hook already to
use !
>
>
>
>>>>>> Wow, those hatch lock extensions are expensive!  Just go to your
local
> hardware and buy an aluminum turnbuckle, about 5  inches long.l Open one
> looped end to form a "J". When that is hooked onto  the latch pin on the
> bottom of the opening, swung around 45 degrees, and  the looped end locked
> into the hatch lock, it is  LOCKED.<<<<<<
>
>
>
>
> Cheers,
>
> Frank  Condelli
> Almonte, Ontario, Canada
> '87 Westy & Lionel Trains (_Collection for sale_
> (http://frankcondelli.com/trainsal.htm) )
> _Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
> Vanagon/Vanagon Westfalia Service in the Ottawa Valley
> _Vanagon Stainless Steel Exhaust  Systems_
> (http://frankcondelli.com/exhaust.htm)
> _BusFusion_ (http://www.busfusion.com/)  a VW Camper  camping event,
> Almonte, ON, June 10 ~ 13,  2010