At 01:32 PM 7/27/2010 Tuesday, Shawn Wright wrote: >I did manage a measurement with my caliper depth gauge - the old >ones are about 0.4mm larger than the new. I didn't calculate the >overall size, but this doesn't seem like a lot of wear. According to Bentley 46.6 the starting inside diameter is 252 mm and the maximum permitted diameter after machining is 253 mm. The maximum permitted diameter after wear is 253.5 mm. They say to use oversize linings after machining 0.5 mm or more. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.