Seems to me that I used 1/4 inch. It's easier to find at FLAPS here in the states. Are you in Canada? Larry A.
On Thu, Jul 29, 2010 at 2:23 PM, neil n <musomuso@gmail.com> wrote: > Hi all. > > Am short of time. In the middle of minor hose re-do at tank stopping > minor seeping at 1 or 2 hose connections. > > '81 Vanagon. > > 5mm ID low pressure braided currently installed. Is this the correct > size? End was cracked pretty bad. Only 2 YO. Cable straps were used. > > I have 7mm hose on hand if thats a better fit. (though it slips very > easily over nipples) > > Thanks! > > Neil. > > -- > Neil Nicholson '81 VanaJetta 2.0 "Jaco" > > http://tubaneil.googlepages.com/ > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.