Date:         Sat, 31 Jul 2010 12:37:29 -0400
Reply-To:     Edward Maglott <emaglott3@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott3@GMAIL.COM>
Subject:      Re: Turning off rear heater
In-Reply-To:  <0bbc01cb3044$4c0f6da0$6401a8c0@PROSPERITY>
Content-Type: text/plain; charset="us-ascii"; format=flowed

People complain about the front heater valve not shutting off
completely and I see only a little of that on my van.  Sometimes if I
move the lever open then closed sharply a few times it seems to close
more fully.  I tried that on the rear heater valve this time too.  I
had marked a 1 and a 0 on the heater case to remind me which way was
off, and wanted to make sure I had it right.  After I opened and
closed the valve a few times it seemed to close better.

Anybody have a specific non-stock valve recommendation that they have
used on the heaters?

Edward

At 08:06 PM 7/30/2010, you wrote:
>I'm wondering if there's junk in your valve causing it to not shut
>off properly.
>
>I believe that is a separate replaceable part.
>
>and sure you could put a gate valve or ball valve inline with the
>rear heater if you wanted.
>
>and  mostly they 'shut off well' I'd say.
>
>
>----- Original Message ----- From: "Edward Maglott" <emaglott3@GMAIL.COM>
>To: <vanagon@GERRY.VANAGON.COM>
>Sent: Friday, July 30, 2010 3:53 PM
>Subject: Re: Turning off rear heater
>
>
>>Mine is the same way, it doesn't turn off all that well.  On a recent
>>hot trip I found when I got into camp and went under the back seat to
>>get something, everything under there was hot hot hot.  I checked the
>>valve and it was in the off position, but apparently enough hot water
>>was still going through there to heat that core up plenty hot.  Maybe
>>an alternative valve could be put into the system instead of the
>>stock one?  Enlarge the hole in the heater cover enough to be able to
>>operate it?  Anybody done this?
>>Edward