|
At 03:12 PM 7/31/2010, Timothy Marciniak wrote... >Wondering if anyone has had to replace the hard plastic fuel line that >runs from the fuel filter to the rubber fuel line that attaches to >plastic fitting at the firewall. I have some of the hard plastic line (8mm OD, Nylon-11, rated over 200 psi) left over from when I replaced all my fuel lines. On my '81 aircooled, it took about 14 feet total (this covers the return line, too). It's pretty easy to work with, but it's stiff, and holds its shape. You need to gently heat it and bend it to the correct shape. I held it in front of a Reddy heater until it got soft enough to shape. If you want some, I can send you 15' for $10, shipping included. The stuff I have is natural color (white), not black. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.