Date: Sat, 7 Aug 2010 15:34:38 -0700
Reply-To: Dug Smith <dug@DUGBERT.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dug Smith <dug@DUGBERT.COM>
Subject: Re: New Stereo Install Questions (First Anual Noob-Aid Concert
Series)
In-Reply-To: <COL109-DS14897A9356BD48DEE2428FEE920@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
You have a voltmeter, right? You're gonna need one.
> First, notice the pair (red/red-white) that are taped together on the left
> hand side of the aperture. When I un-installed the old harness this pair
> was twisted together with *one* wire from the old harness. I believe that
> these are a hot lead to something (not sure what) and that the second
> (probably red-white) wire carries power to something else in series further
> off on the right hand side of the dash.
That makes sense - test them both. I would expect that one's a
conditional power (comes on with the key or maybe the lights), and the
other is dead all the time - it's power to something else. If the other
lead is providing power, touching the two together should make "it" come
on. Label it at this point.
If it gets power with the key, it goes to the red lead on the stereo.
If it gets power with the lights, it goes to the orange and white lead.
There's a light wire to the cigarette lighter if that's missing from
your previous install.
> Second, the big red 14 ga wire looks like a power lead as well. Not sure
> what I should connect it to either.
That should be power all the time - this is the one that actually powers
the stereo, and keeps the clock going when the stereo is off. That
should usually be connected to the yellow lead.
> Third, the blue wire I believe is the antenna power-life lead. I'm actually
> planning on removing the power antenna at some point (maybe later today),
> but it would be nice to know what this should be used for.
Blue is usually for the antenna, but if you're taking it out, you might
as well take it out while you can see what you're doing :o)
> Finally, I believe that the brown wire is the body ground. I'd appreciate
> it if someone who knows can confirm my suspicion.
Test it - that might be conditional power from the switch. If it is, to
the red lead. If it tests as continuous to ground, then it's ground.
I've got to the point where I test everything - even the stuff I've done :o)
> Maybe I just don't understand what I'm looking at in Bentley, but after
> peering at the pages and wondering all morning I'm getting fed up. I want
> me some tunes! Your knowledgeable assistance would be greatly appreciated.
The Bentley won't know about the wiring the previous owner did :o)
toodle pip,
--
Dug Smith | Terry Pratchett: It's almost
(mailto:dug@dugbert.com) | impossible to ride a rock and roll
(http://www.dugbert.com) | motorbike and stay on for three verses.