Is there a source for these cables other than a junkyard? Mine is so damaged that eve n when pushed in with pliers to "CLOSE" the valve, the cable has extra and is bent on the end terribly and won't fit in the bracket on teh lever. > Date: Thu, 5 Aug 2010 17:00:16 -0700 > From: musomuso@GMAIL.COM > Subject: Re: WAS:trip out west-NOW: Heater valve > To: vanagon@GERRY.VANAGON.COM > > On Thu, Aug 5, 2010 at 4:08 PM, Bob Stevens <mtbiker62@gmail.com> wrote: > ..... > > > > Also, removing the > > heater/fresh air control plastic plate so you can see into that part of > > the controls, or to make adjustments to the cables at that end, is also > > easy to do. > > > One mistake I made in fiddling with levers and control cables during > my engine swap, was to put the cable back in the wrong hole on one of > the levers. The angles were such that eventually the cable bent at > lever. > > I would suggest that it's not beyond the scope of the well meaning > owner to have done this and is worth checking. > > > Neil. > > -- > Neil Nicholson '81 VanaJetta 2.0 "Jaco" > > http://tubaneil.googlepages.com/ > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.