Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2010, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 14 Aug 2010 09:59:53 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Pop top -- catch this before it's too late.
Comments: To: "Mike \"Rocket J Squirrel\"" <camping.elliott@gmail.com>
In-Reply-To:  <4C66C67A.8050308@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Sat, Aug 14, 2010 at 9:38 AM, Mike "Rocket J Squirrel" <camping.elliott@gmail.com> wrote: > David Beierl wrote:

>> >> The basic cause of the problem is that the part of the hinge that >> bears on the center tube is much too thing and acts more like a knife >> than a bearing.  The rather frightening damage shown in the photos >> happened between 1984 and 2004.  Another cause is that as Scott >> points out, this stuff never gets preventive lubrication. > > I can't find a post from Scott dealing directly with this. I eyeballed > the situation here and it's not clear where/how one lubricates the > problem area. And with what. > >

Here's some more pics Mr. Squirrel

My struts in pieces and repaired: http://tinyurl.com/28vumgd

there are more in that album. Just click the arrows.

pics show what may be a similar, or same repair as David did. Just so you know the copper is not original. I lubed with wheel grease. i would suggest white grease to anyone with things apart/repaired.

My best guess, all *stock* parts assembled, is that if one sprays some "stay put" type liquid lube (chain lube?) on the area where the two arms pivot, it may work it's way into where the top arm pivots on the the cross bar where it enters through the lower arm. My other best guess is that lube helps, but since it's such a narrow area rubbing on that cross bar, the wear will happen regardless.

Neil.

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.