yeah, as i said before drill it. and that nub will come right out once bolt head off and tension released. :) alistair
On 9-Aug-10, at 4:45 PM, David Beierl wrote: At 07:26 PM 8/9/2010 Monday, Jonce Fancher wrote: > already, Just drill out the head and slide it off of the remaining > Pin. Once the axle and CV is out of the way you can play with it to BINGO! Jonce has remembered that once the head is off you've got an inch of bolt to play with, not a wee little nub practically flush to the surface. Given that, it's the obvious answer. Yours, DAvid |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.