Seriously? My 87 auto has been bogging down lately when fully warmed up, going from a full stop or accelerating out of a turn or what-have-you. The tranny isn't slipping, the O2 and temp sensors are new. It seems to "get its breath" around the top of second gear and runs normally at highway speeds. Have you taken any pics or video of the repair process? Any further damage from continuing to run it? I have a road trip in five days- I was going to start on this by cleaning all the engine grounds. Cya, Robert On Aug 12, 2010 5:30 PM, "David Beierl" <dbeierl@attglobal.net> wrote: > At 06:42 PM 8/12/2010 Thursday, Mike \"Rocket J Squirrel\" wrote: >>On one of my Digijet ECUs, the engine bogs sometimes when pulling away >>from a stop. With the other, it does not. > > Soldering iron. Stereo microscope if possible. Lots of > patience. And have fun with the conformal coating on the back of the board. > > :) > d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.