Date:         Thu, 12 Aug 2010 10:21:24 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Marshall 290 Regulator Cover
Comments: To: RAlanen@aol.com
In-Reply-To:  <b5ef0.52e37cbc.39951f73@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi Frank.

Thanks. Neat solution. Good tip!

To all, FWIW, I loosened the LH thread fitting at main valve,
**slightly** turned regulator CW ( when looking toward Westy front)
and get the cover off. Yes this twisted the copper lines a little, but
no more than what one would do if checking pressure by undoing one of
the copper lines. This provided *just* enough room to get at adjuster
screw.


Neil.





On Thu, Aug 12, 2010 at 2:57 AM, Frank Condelli <RAlanen@aol.com> wrote:
> In a message dated 11/08/2010 6:16:18 P.M. Eastern Daylight Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
>        Neil, correct, BUT, you can  orient it temporarily so the
> adjustment is pointing down and the vent  horizontal.  It will not be a problem.  I
> have done this many time and  currently have it that way on my van as I too
> am testing different propane  pressure settings to see what effect it has on
> the fridge operation.  I  have a fairly new, one year I think, Marshall
> Brass 290 and have now screwed in  the adjustment screw two full turns and the
> fridge seems to be operating  better.  I will know more after this weekends
> adventures at BOTC.
>
>>>>>Seems it's installed this way so vent faces  down.<<<<<
>


-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines