Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (August 2010, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Mon, 23 Aug 2010 11:28:01 -0700
Reply-To:   Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:   Re: lucas brake pads in 87 westy
Comments:   To: gary hradek <hradek@YAHOO.COM>
Content-Type:   text/plain; format=flowed; charset="iso-8859-1"; reply-type=original

no ... the metal part of the pad ? they should just fit, with difficulty almost. The idea is that they can slide toward the disc slightly under pressure from the piston, , but ideally there is zero slop at the same time. I lube that surface very, very sparingly with copper anti-seize compound.

if you just sanded on the metal part of the pad a little I doubt you removed much material. scott www.turbovans.com ----- Original Message ----- From: "gary hradek" <hradek@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, August 22, 2010 8:32 PM Subject: lucas brake pads in 87 westy

>I was please to find how easy it was to replace the pads. I would suggest >getting the spreader tool which is free at autozone and some high temp >brake grease to hit the spots the pads will rub. One question, is it >normal to need to sand the edge of the pads so that they move freely? > No way it would have worked otherwise. Gary


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.