Date:         Sun, 22 Aug 2010 17:44:36 -0500
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Re: Hot A/C Wire
Comments: To: george jannini <georgejoann@gmail.com>
In-Reply-To:  <AANLkTikc8xExLE6vzr9mCTXNHPNTCW7U4VbJn3uW7wbw@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Wow. George, thanks for the hands-on.  I would say that mine IS alarmingly
so.   Never touched it but never had a fire.  Hate to blame it on the a/c
guy, but just asked him to repeat all his steps and I guess I have to start
with new wires or get a thicker skin.

Again...Really, thanks for the up-to-date check so I can diagnosis.
Have a really great nite.  Grilled fish tacos in like 5 minutes.  Gotta go
cut some limes.

BTW-This is real time...so If you can smell it, you are close enough to stop
by. :-)
Michael in San Antonio
91GL Weekender AT 2.1L 'Gringo'



On Sun, Aug 22, 2010 at 5:16 PM, george jannini <georgejoann@gmail.com>wrote:

>  Ok, just pulled the cover & checked underneath.
>
>  The fusible link has been replaced with a 12 volt 50amp circuit
> breaker, connections appear clean and the insulation shows no
> indication of breaking down.  I ran the AC with the circulation fan
> set at position 4 for around 10 minutes.  Wiring gets pretty warm, but
> not alarmingly so, IMHO.
>
> George/ATL
>