At 02:32 PM 9/9/2010 -0700, Scott Daniel - Turbovans wrote: >i'm going to plug in another wiper switch if I have a handly one .. >though it sure seems like it's working since it will send a signal to sweep >the wipers when pulling the washer stalk....making one think the switch can >supply the signal it's suppossed to.. Scott, the signal to start the wipers takes very little current. The load of the wash motor is dragging the voltage down because there's a bad connection at the switch, in the switch or upstream of it. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.