Re, flaccid arm rest: Knock the roll pin out, remove arm rest, use loctite on the allen screws on the arbor it's attached to. Open split in roll pin if necessary to prevent it working its way back out. Be careful to reassemble correctly, you can get the arm 180 degrees cockeyed, and your elbow won't bend that way for sure. This job takes 3 hands, but can be done by oneself if your vocabulary of curses is adequate. George/ATL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.