At 06:03 PM 9/17/2010, Danny Bean wrote... >I'm currently removing my bad starter to install a reman one. The >problem that I'm having is with the lower mount nut... what do you >suggest to get this stupid nut loosened and off. Btw its pretty >rounded off now. Dremel w/cut-off wheel. Try to split the nut as best you can without munging the threads on the stud. You might even try grinding one side of the nut off, but you're more likely to need a new stud then. Beyond that, a cold chisel, and a new nut. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.