Date:         Thu, 14 Oct 2010 10:29:17 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Solving sliding door lock contact troubles.
Content-Type: text/plain; charset="us-ascii"; format=flowed

If you have a stubborn or recurring problem of the sliding door power
lock not working, clean the contacts thoroughly with 1500-grit
sandpaper.  If that doesn't work, carefully file down the wear
grooves in the spring-loaded contacts so they're at least mostly
gone.  That makes sure the contact is on the little raised dots on
the door connector, which are the only part you can keep bright and shiny.

Yours,
David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.