Date: Fri, 15 Oct 2010 20:22:30 -0500
Reply-To: Tom Hargrave <thargrav@HIWAAY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tom Hargrave <thargrav@HIWAAY.NET>
Subject: Re: Friday NVC: British Carburettor hilarity
In-Reply-To: <009001cb6ccf$33adcf50$6501a8c0@PROSPERITY>
Content-Type: text/plain; charset="us-ascii"
I have a device that goes in series with the sparkplug wire. It has its own
internal spark gap that you can see fire as the plug fires. The maker also
claims that the color of the spark tells you your fuel richness but I just
use it to verify spark.
Tom
www.stir-plate.com
-----Original Message-----
From: Scott Daniel - Turbovans [mailto:scottdaniel@turbovans.com]
Sent: Friday, October 15, 2010 8:12 PM
To: Tom Hargrave; vanagon@GERRY.VANAGON.COM
Subject: Re: Re: Friday NVC: British Carburettor hilarity
OK..
who's got a "Colortune" ?
Gunninson is the brand of mine ..from merely Olde.
you watch the color of the flame inside the combustion chamber with this
device..
goes in a spark plug hole.
For mixture adjusting, and disagnosis.
I've never bothered to use it yet ...someone just gave it to me a while
back.
----- Original Message -----
From: "Tom Hargrave" <thargrav@HIWAAY.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, October 15, 2010 11:42 AM
Subject: Re: Friday NVC: British Carburettor hilarity
>I remember Unisyn with the little floating ball on the side. I have one
> somewhere.
>
> I got away from using that tool & went to a mercury manometer on cars &
> motorcycles with a vacuum port and a stethoscope on those that did not.
>
> One trick most don't know about is - with milti-carbed engines you can
> listen to the base of each with a stethoscope. Each carb venture makes a
> whistle when air is passing through & when the pitch is the same they are
> in
> balance.
>
> Tom
> www.towercooler.com
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
> John Rodgers
> Sent: Friday, October 15, 2010 1:16 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Friday NVC: British Carburettor hilarity
>
> Back in the 60's I lived in the Florida Keys. I bought a used Volvo
> 544 with a dual carbed B-1800 engine and had made a killer deal - I
> thought;
> The car looked new, and I liked the way it it felt on the road and how I
> fit
> into it. Had a wife and 1st kid at the time. It made the perfect family
> machine. Engine ran "ok" but wasn't wondeful. It ran smooth, but just
> didn't seem to have any power. It needed a tuneup I knew, and at the time,
> the only place that would even talk to me about "that Potato Bug looking
> Volvo with the funky dual carbs" was way up in Miami. So, I dutifully
> treked
> up there to try and get the 544 tune up.
> There, a mechanic took pity on me and showed me "the secret" on how to
> tune
> the carbs. Introduced me to the wonders of the Unisyn, he did. Told me
> that
> from now on I could do it myself and not have to drive to Miami.
> With his tuning, when I drove away I was amazed at the power gained. I
> never
> hired out another tuning on that engine again after that. Wish I still had
> that car. But - someone ran a stop sign and crunched it for me. Bought a
> brand new Volvo after that. But it wasn;'t the same. That model 544 was
> special. Much later I bought a baby blue Jaguar XKE V-12 convertible with
> FOUR Stromberg carbs. A Unisyn tool came in the glove box - but that is
> another story.
>
> John
>
>
> John Rodgers
> Clayartist and Moldmaker
> 88'GL VW Bus Driver
> Chelsea, AL
> Http://www.moldhaus.com
>
>
> On 10/15/2010 12:29 PM, Rowan Tipton wrote:
>> I thought everyone had a unisyn. I used it a lot on various
>> multicarbed VWs and various British sport cars. I doubt that I've
>> touched it in 25 years.
>>
>> r
>>
>>
>>
>> On Oct 15, 2010, at 1:21 PM, Loren Busch wrote:
>>
>>> On Fri, Oct 15, 2010 at 10:09 AM, Jim Felder <jim.felder@gmail.com>
>>> wrote:
>>>
>>>> A Unisyn is way better, IMHO. You can get very, very accurate
>>>> readings from the floating plastic ball, much more than by listening
>>>> to a hose.
>>>>
>>>
>>> Jim, you realize that there are a bunch of people rading this thread
>>> and wondering what the h**l we are talking about.
>>> My Unisyn went to a close friend that was just finishing a complete
>>> restoration on a TR-2, back in the early '70s.
>>
>>
|