Date: Thu, 21 Oct 2010 04:16:42 -0700
Reply-To: Jim <jrasite@EONI.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim <jrasite@EONI.COM>
Subject: Re: 2.0 ABA inline gas Vanagon. how it works
In-Reply-To: <03a201cb70eb$181f6fd0$6501a8c0@PROSPERITY>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Thanks for the offer Scott. I already have most all the DV parts.
The big question was fuel system. And yes, 50 deg install.
Additionally, with the raised A'wagen bed, I can easily modify the
steel engine lid and keep the cross-flow head.
So there is an inline digifant system. Hints on what vehicles used it?
Jim
On Oct 20, 2010, at 11:42 PM, Scott Daniel - Turbovans wrote:
> Hey, I've been saving this very excellent and 100 % complete and
> ready to
> use diesel bell housing ..
> complete with good cross shaft and bushings, bracket for clutch slave
> cylinder, good oil scroll ,
> TOB guide tube etc...deluxe, in good condition, nothing to fix or
> modify on
> it, ready to go.
> Would be real handy to sell that right now.
> And I have some of the other needed parts too.
>
> Scott
> www.turbovans.com
>
> ----- Original Message -----
> From: "neil n" <musomuso@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Wednesday, October 20, 2010 9:56 PM
> Subject: Re: 2.0 ABA inline gas Vanagon. how it works
>
>
> Hey Jim.
>
> Air box I used: http://sites.google.com/site/tubaneil2/aircleaner
> IIRC the Honda box shown is from a 2000. Bigger. Closer in size to the
> stock ABA box.
>
> If you have to, it's possible to flip the nose mount on tranny
> allowing engine to be positioned further forward. The linkage
> obviously needs to be shortened. (how I did it:
> http://tinyurl.com/3y6v6km) OR, kill two birds. Reposition mount
> brackets on bars to allow for hydro mounts and engine placement.
>
> Yes. You need: DV FW, clutch housing, PB. Maybe Vanagon clutch bolts
> on? And, DV oil pickup tube, pan engine brackets. I use a stock gas
> starter no issues but with a KEP FW.
>
> The '96 likely has OBD2 Motronic. It's *possible* this could be used
> on a 1.8 counter flow head. Bonus: knock sensor and OBD! OBD2 Motronic
> may need Jetta VSS sensor to run properly. Don't know how it mounts.
> Digifant is obviously simpler. Personally I'd source Digifant parts
> from a Jetta. There will likely be more choice in the used parts dept.
>
> Neil.
>
>
> On Wed, Oct 20, 2010 at 7:53 PM, Jim Arnott <jrasite@eoni.com> wrote:
>>
>> Okay... Continuing this discussion, Let's say I have a '96 2.0 ABA
>> from a Jetta that I want to bolt it into an '84 Adventurewagen.
>>
>> Questions:
>>
>> 1.) fuel system? Digifant, right? Go scare up an '86 or later Vanagon
>> and take it all? ECU, AFM, injectors, distributor and? Or do I snag
>> the Jetta stuff? (The Jetta was junked because of immobilizer
>> problems. A couple years ago. Don't know how much is left/missing.)
>> 2.) Carrier bars? Late ones, right? The '82 bars won't work with the
>> wasserboxer gear box? Positions motor 50 mm too far aft? Does that
>> mean I need the entire post-82 engine carrier system?
>> 3.) air filter. What to use? I seem to remember Dodge Caravan, but
>> that might have been for adding a diesel. K&N is not an option in my
>> world.
>> 4.) clutch and flywheel? V'gon diesel?
>>
>> More questions to come I'm sure as we get closer to committing.
>>
>> Jim
>
>
>
> --
> Neil Nicholson '81 VanaJetta 2.0 "Jaco"
>
> http://tubaneil.googlepages.com/
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-
> gas-engines
| 
