Date:         Sun, 24 Oct 2010 15:11:25 -0400
Reply-To:     B Feddish <uprightbassghost@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         B Feddish <uprightbassghost@HOTMAIL.COM>
Subject:      Re: Is there a way to test the heater fan>
Comments: To: zolo@foxinternet.net
In-Reply-To:  <8DE071F26C0242B6812B2C8193E33C7C@ZoltanPC>
Content-Type: text/plain; charset="iso-8859-1"

Got it. I just stuck 12v at each of the switch positions and it worked. It must have been the fan as when I tried to turn it when I took it out it was frozen.
 
Bryan
 
> From: zolo@foxinternet.net
> To: uprightbassghost@HOTMAIL.COM; vanagon@GERRY.VANAGON.COM
> Subject: Re: Is there a way to test the heater fan>
> Date: Sun, 24 Oct 2010 11:34:24 -0700
> 
> I think, the old motor has burnt inside of it, being shorted and overheating 
> in the process. Just check if you have juice where should be and test your 
> 'new' motor. Assemble with the box having new seals for the flaps.
> Zoltan
> 
> ----- Original Message ----- 
> From: "B Feddish" <uprightbassghost@HOTMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Sunday, October 24, 2010 11:02 AM
> Subject: Is there a way to test the heater fan>
> 
> 
> 
> The heater core is out. Besides the heater core leaking coolant, there was 
> tons of smoke last winter pouring out my dash one day when the fan died. 
> Lots of burning smells. Now I have a new fan motor too but I do not see 
> anything burnt in the heater box. Is it possible it was that resister in 
> there? It looks fine. Is there a way to test this fan before putting it all 
> back in today?
> 
> Thanks,
> Bryan =
> 
> 
> --------------------------------------------------------------------------------
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.862 / Virus Database: 271.1.1/3216 - Release Date: 10/23/10 
> 23:34:00
>