At 02:03 PM 11/1/2010 -0700, Michael wrote: >difficulty was pushing the wires/harnesess and everything back into >place and then getting the mounting holes aligned with the bolt >holes in the body. The way my '89 is mounted, you undo one screw at the bottom that holds the plastic panel into the metal bracket and then lift the panel off the bracket. Once you put it back into the bracket the hole at the bottom lines up automagically. Is yours different? Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.