Date:         Thu, 4 Nov 2010 07:33:57 -0700
Reply-To:     Don Hanson <dhanson928@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hanson <dhanson928@GMAIL.COM>
Subject:      Re: 300 spots of lubrication
Comments: To: Jim Felder <jim.felder@gmail.com>
In-Reply-To:  <AANLkTin21JNT4c8eaH3wzRKhg0zKPtiCOONB9YFURX5O@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

  I find it online.  'shopping' and Google.

  It is quite expensive, shocking in fact...But it is really good
stuff.  There's high pressure in the can, and a very  agressive 'carrier'
solution.  Comes out of the can as a very thin and penetrating  liquid that
quickly flows into all the little crevices and cavities then the solvent
medium evaporates quickly.  Leaves a sticky high temp grease behind that
really 'slicks' things up.  My shift linkage espesially likes it.  You can
squirt it, up to about 6 feet,  to places you can't easily reach...it
penetrates well.  Speedo cable is another spot where it has done right by
me....and the Side-slider rollers...though there, it will sometimes collect
grit.

It would be useful if someone could link to or take time write up a good
list of points that need lubing on the vanagons.  I bet there are some that
I haven't found yet..and I go searching, with my Wurth's, about every couple
of months..I think 300 places to oil...that may be an exaggeration...grin.

  Don Hanson
On Thu, Nov 4, 2010 at 6:30 AM, Jim Felder <jim.felder@gmail.com> wrote:

> Where do you find it?
>
> Jim
>
> >
> > Wurth   saBesto  HHS 2000   works on just about  everything.  sprays as a
> > liquid and turns into a high temp grease.   later  mark d
> >
>