Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 4 Nov 2010 11:15:24 -0400
Reply-To:     dhundt@BENDBROADBAND.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hundt <dhundt@BENDBROADBAND.COM>
Subject:      Re: No Go on CV Boot R&R
Comments: To: Mark Dearing <VWBrain@AOL.COM>
In-Reply-To:  <9573C0ED16EF451589B086314CACE450@HUNDTDESKTOP>
Content-Type: text/plain; charset=us-ascii

I would add a caveat to this. When you replace just the joints and boots, quality control is completely in your hands. You can inspect the parts for defects, and ensure proper lubrication and installation. When you install a pre-assembled unit, you put the QC solely in the hands of someone whose only goal was to assemble as many of these things as possible before lunch. A warranty is great, but if the part fails prematurely you still have to remove the thing, take it back to the vendor and re-install the replacement. At the very least, when installing complete axles, pull back the boots and check for proper lubrication before installation. I've never had a C.V. joint I have installed myself fail, but I have had a rebuilt axle fail (on a vw Quantum), the low cost was negated by my having to do the job twice. Don

----- Original Message ----- From: Don Hundt <dhundt@bendbroadband.com> Date: Thursday, November 4, 2010 11:02 am Subject: Fw: No Go on CV Boot R&R

> > ----- Original Message ----- > From: "Mark Dearing" <VWBrain@AOL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Thursday, November 04, 2010 10:34 AM > Subject: Re: No Go on CV Boot R&R > > > > In a message dated 11/4/2010 9:43:42 A.M. Eastern Daylight Time, > > vanagon@BUSDEPOT.COM writes: > > > > It really depends on how long the boot was torn and whether the > CV was > > damaged. > > > > > > Also take the time factor into it. R&R axle 2 hours R&R > both boots > > 3.4 > > hrs and that is if they come apart without any trouble. We > are seeing > > new axles complete for less than $50 for some cars. come with a > warrenty > > and > > is easier and more cost effective than changing a boot later > mark d > > > > __________ Information from ESET NOD32 Antivirus, version of > virus > > signature database 5591 (20101104) __________ > > > > The message was checked by ESET NOD32 Antivirus. > > > > http://www.eset.com > > > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.