Date:         Sat, 13 Nov 2010 10:20:39 -0500
Reply-To:     Jeff Lincoln <magikvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Lincoln <magikvw@GMAIL.COM>
Subject:      Re: 1.9 Coolant hose Diameter
In-Reply-To:  <BLU0-SMTP195625472F0D92CD59941EAA6340@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

Thanks Scott and Karl.

Karl that was exactly my plan - all the heater lines were removed from my
bus by the PO (for good reason). He decided it was going to be a summer only
ride and so he made a copper "U" peice that goes from #12 to #13. Works
great - except that I need heat now :)

So I have a lot of 5/8 hose and some "T" fittings for reconnecting
everything but hadn't planned on the larger size of #13 - I wasn't able to
really measure it without removing that "u" part he made.

I guess I'll get some various sized x to 5/8ths barbed reducers - one is
bound to fit. I also guess I'll stick with copper.

Thanks again for your input gentlemen.

--
Thanks,

Jeff
'85 GL (Gertie)
'90 Carat (Grover - the noble parts donor)
'86 (We call this one Scrap)
'78 Bus (Melissa) Patty's Bus