Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2010, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 13 Nov 2010 18:51:05 -0500
Reply-To:     Greg Potts <greg@POTTSFAMILY.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Greg Potts <greg@POTTSFAMILY.CA>
Subject:      Re: Replace Heads or Engine?
Comments: To: mark drillock <mdrillock@COX.NET>
In-Reply-To:  <4CDEF9C5.9000006@cox.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi Mark,

I am in the starting stages of an engine conversion... Not because my WBX is dead but because I am not satisfied with the power delivery, gas milage, parts availability or durability of the platform. My vanagon sees about 30,000 miles per year of daily driving and from where i sit the advantages of the inline4 VW are too attractive to ignore.

So far my acquisitions are as follows, in order of appearance:

1982 Engine hanger bars and motor mounts were picked up at a swap meet (BusFusion) for $100. Using the 82 mounts will require rotating the front transmission mount and shortening the shift linkage rod by about 2" to accomodate the forward mounting position of the 82 bars. I could simply cut and weld the bars and leave the transmission where it is, but then the engine ends up tighter against the rear of the engine compartment.

I bought an NOS diesel oil pan for $40, also through the list. This one was delivered at Buses Of The Corn.

Another diesel specialist I know through the list(s) sold me: Diesel Bell Housing, clutch, flywheel, pressure plate, dust cover, oil pump pickup tube and top-end water hoses: $170. I picked it up in person at Watkins Glen and didn't have to pay shipping or duty.

1996 2L Jetta ABA Engine, complete: $300. Dad's bringing it home this week after a campout this weekend in VA.

The ABA engine will also be getting a new cam and a digifant cylinder head from a 1.8L engine, which will probably double the cost of the powerplant before we're done. If I can find the right parts I will upgrade the exhaust manifold as well.

The remaining parts I will need will include a diesel starter and I will also need to fabricate an exhaust system, throttle linkage and some coolant interfaces... By the time I am done I will probably have about $1000-$1200 invested not including my labour.

But in terms of labour I'd venture to say that it's basically the same or less effort as involved in any other engine conversion, for a great deal less $$$. If I had the coin I'd go with a Bostig Zetec conversion in a metric heartbeat, but since I don't this is the next best answer available to suit my budget.

Am I investing $2000 in labour? That would be about 24 hours at the local shop rate; sounds optimistic for a first-timer but it might just be possible for Scott or someone else with a lot of inline experience.

Happy Trails,

Greg Potts Toronto, Ontario Canada 197x Westfakia "Bob the Tomato" 1987 Wolfsburg Weekender Hardtop (ND Graphics graphics wrap) 1988 Wolfsburg Weekender Hardtop (Colleen's ride) www.pottsfamily.ca

BUSES OF THE CORN - AUGUST 12-14th, 2011 www.busesofthecorn.ca

Greg

On 11/13/2010 3:49 PM, mark drillock wrote: > Hey Scott. You know the ins and outs of the diesel mounting stuff about > as well as anyone here. How much would you think to charge for > converting a wbx van to an inline 4 gas engine using diesel bits where > possible? Maybe you could offer that as a service and have people lined > up around the block for a nice cheap conversion? Total parts and labor > at $2500 sound right, like some people say? Or maybe $3000 since you do > such nice work? The engines are only $300. > > Mark

--


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.