That may be, but it worked until just recently and that LED was never touched; only the high-beam LED was replaced in July and the turn signal indicator was working before and after. Guess I'll tweak that and see if it remedies the situation. Thanks for the input. Stephen --- On Tue, 11/16/10, mark drillock <mdrillock@cox.net> wrote:
From: mark drillock <mdrillock@cox.net> Subject: Re: Turn signal indicator troubleshooting To: "Stephen Grisanti" <bike2vcu@YAHOO.COM> Cc: vanagon@GERRY.VANAGON.COM Date: Tuesday, November 16, 2010, 11:06 AM
Well, it looks like someone inserted the led for the turn signal indicator backwards in the cluster led socket. Mark Stephen Grisanti wrote: > Okay, here's what I discovered in my early morning attempt to figure this out... > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.