Date:         Tue, 16 Nov 2010 09:50:45 -0800
Reply-To:     Stephen Grisanti <bike2vcu@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen Grisanti <bike2vcu@YAHOO.COM>
Subject:      Re: Turn signal indicator troubleshooting
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <4CE2B488.9040803@cox.net>
Content-Type: text/plain; charset=iso-8859-1

I'll try it and report back, but will the test after that require finding 50 ft. of shoreline and a left-handed skyhook?
 
Stephen

--- On Tue, 11/16/10, mark drillock <mdrillock@cox.net> wrote:


From: mark drillock <mdrillock@cox.net>
Subject: Re: Turn signal indicator troubleshooting
To: "Stephen Grisanti" <bike2vcu@YAHOO.COM>
Cc: vanagon@GERRY.VANAGON.COM
Date: Tuesday, November 16, 2010, 11:42 AM


If you would be willing to do one more thing, try unhooking the small 
blue wire from the alternator and then run the first 2 test modes again.

The TS indicator is a green led, the HB indicator is normally an 
incandescent bulb with a blue plastic cover. The bulb has no polarity 
but the led needs to be plugged in correctly.

Mark

Stephen Grisanti wrote:
> That may be, but it worked until just recently and that LED was never touched; only the high-beam LED was replaced in July and the turn signal indicator was working before and after.  Guess I'll tweak that and see if it remedies the situation.  Thanks for the input.
>
> Stephen
>
> --- On Tue, 11/16/10, mark drillock<mdrillock@cox.net>  wrote:
>
>
> From: mark drillock<mdrillock@cox.net>
> Subject: Re: Turn signal indicator troubleshooting
> To: "Stephen Grisanti"<bike2vcu@YAHOO.COM>
> Cc: vanagon@GERRY.VANAGON.COM
> Date: Tuesday, November 16, 2010, 11:06 AM
>
>
> Well, it looks like someone inserted the led for the turn signal
> indicator backwards in the cluster led socket.
>
> Mark
>
> Stephen Grisanti wrote:
>> Okay, here's what I discovered in my early morning attempt to figure this out...
>>
>
>
>
>
>