I used a 'buck' that I made...2x4 legs, a 4X4 cross buck and some feet > made from particle board, with a couple of gussets to brace it. I can > re-post pics if anyone wants...I saved it rather than taking it apart...I > was a bit unsure of my work. I used a come a long with the purchase reduced > to 1:1... Probably the equal to the winches you are mentioning... > > For the motor.(should make that clear) .the floor jack worked fine for the tranny. I did use my band saw to make a cradle-block, to help steady the roundish bottom of the tranny on the flat pad that the floor jack lifts with.. I did all this stuff alone...Actually balanced the tranny with my arms and used my left foot to pump the floor jack once or twice... Don Hanson > Don Hanson > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.