At 11:14 AM 12/2/2010, Jeff Lincoln wrote: >OK, does anyone know where I can find a flow chart for the 1.9 cooling >system. I've seen the 2.1 but can't seem to find the 1.9. I need to >reinstall the heater lines in Gertie (it's COLD out there) and I want to >make sure that I'm hooking things to the right spot :). Fwd end R head to tee to valve to core to tee to pipe that crosses over the engine. Don't rip the studs out of the intake runners, you'd be amazed how easy this is.
>My second question should be easy too - I suspect I have an issue witht he >wires that go to the Temp II sensor. If I decided to just run all new wire >to that connector what gauge wire should I use? VW used 18 AWG. Goes (white) to ECU pin 2 and (brown/blue) to the infamous rat's nest on the left head. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.