I never took apart a bay & I don't have one right now. If the rear hatch has latch has the same setup as the Vanagon (3 screws) why not take a look? If it's the same it's a quick project. Rob becida@comcast.net At 12/7/2010 09:40 AM, courtney hook wrote: > > >Would a similar thing be possible for a Bay? My 77 Westy is a great >machine, but I've always wondered about a quick escape out the back >in case of fire or ?? >Courtney > > > > > > > On Sun, Dec 5, 2010 at 2:16 PM, Rob > <<mailto:becida%40comcast.net>becida@comcast.net> wrote: > > > > > > > I took pictures of getting to the rear hatch lock from the > > bottom and > > > > adding an inside release. I put the photo sequence on TheSamba > > > > because that seemed like a good place for it. > > > > I hope this helps someone.. > > > > > > > > > <http://www.thesamba.com/vw/forum/viewtopic.php?p=4994627#4994627>http://www.thesamba.com/vw/forum/viewtopic.php?p=4994627#4994627 > > > > > > > > > > > > > > > > Rob > > > > > > > > <mailto:becida%40comcast.net>becida@comcast.net > > > > Western Washington State, USA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.