Date:         Fri, 3 Dec 2010 14:33:53 -0500
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: oil pressure warning system anomaly?
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <4CF8FEA0.6090209@cox.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 09:28 AM 12/3/2010, mark drillock wrote:
>What I was trying to say there was that I unhooked the 2 pin
>connector but bridged the low pressure switch wire ends between the
>two connectors so just it was still connected. This was to give me
>exposed wire so I could put my test meter to it more easily and
>safely with the engine running.

Gotcha.

d

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.