Date:         Thu, 2 Dec 2010 05:36:05 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Heater box foam material?
Content-Type: text/plain; charset="US-ASCII"

In a message dated 01/12/2010 6:04:58 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

        Exactly, same here, been  doing this for many years.  Seems to hold
up, BUT one never knows until you  take the box apart again for some reason
!   Never had any reason to  take apart any of the many heater boxes I have
renovated over the years.


>>>>>I used camper cap mounting tape - just done so  no report on
longevity.  You can it at Ace Harware and other  places.<<<<<<<






Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://frankcondelli.com/trainsal.htm) )
_Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://frankcondelli.com/exhaust.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12,  2011