Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 1 Dec 2010 16:47:37 -0800
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Heater box foam material?
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <D44CB545-7A92-4106-B376-997994F5677B@shaw.ca>
Content-Type: text/plain; charset=ISO-8859-1

On Wed, Dec 1, 2010 at 10:32 AM, Alistair Bell <albell@shaw.ca> wrote:

I tried a couple of things. I found that most self adhesive closed > cell foams were to stiff and not compliant enough to make a good seal > with the low forces applied to close the various flaps. Open cell > foam was better,

Good point.

It may be that I used open cell, I just don't remember. Now you got me thinking. I must have pics of those flaps somewhere!

The original material in some cases, might be non existant for the owner to "refer" to. The open cell may well have been what was there OEM. Mine were nearly dust when I pulled all apart, but what you speak of makes sense in terms of what I recall removing.

Neil.

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.