The two are completely interchangeable on the outside. The 2.1 has a larger throttle plate and does not have the fitting for the distributor vacuum retard. The earlier 1.9 also has two separate switches for closed and full throttle. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of David Beierl Sent: Friday, December 10, 2010 2:20 PM To: vanagon@GERRY.VANAGON.COM Subject: 1.9l vs 2.1l throttle body? What are the differences in dimensions please? External diameter and bore if possible. Thanks, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.